Skip to content
BLACK NOVEMBER SALE ON NOW BLACK NOVEMBER SALE ON NOW BLACK NOVEMBER SALE ON NOW BLACK NOVEMBER SALE ON NOW BLACK NOVEMBER SALE ON NOW BLACK NOVEMBER SALE ON NOW
Ship to

Built to last — and backed

Warranty Policy

Every BRUTEforce machine is covered from the date of purchase, headlined by a lifetime structural frame warranty on functional trainers.

1. WARRANTY PERIOD

The warranty period begins on the original date of purchase shown on the customer’s tax invoice or proof of purchase.

The warranty applies to the original purchaser only and is non-transferable, except where otherwise required by applicable law.

A valid tax invoice, receipt or other acceptable proof of purchase may be required for all warranty claims.

2. BRUTEforce® PRODUCT WARRANTY

2. BRUTEforce® PRODUCT WARRANTY

Functional Trainers

  • Structural Frame: Lifetime
  • Pulleys: 5 Years
  • Cables: 2 Years
  • Attachments: 12 Months
  • Wear Parts: 12 Months
  • Upholstery: 90 Days

X-Bench

  • Structural Frame: Lifetime
  • Wear Parts: 12 Months
  • Upholstery: 90 Days

Attachments

  • Structural Frame: 12 Months
  • Wear Parts: 12 Months
  • Upholstery: 90 Days

Where a product-specific warranty supplied with the product provides a longer warranty period for a particular component, the longer period will apply.

3. WHAT IS COVERED

This warranty covers defects in materials and workmanship that occur during the applicable warranty period when the product:

  • Has been properly assembled and installed.
  • Has been used for its intended purpose.
  • Has been operated within the published product specifications and weight limits.
  • Has been properly maintained.
  • Has been used in the environment for which it was designed.
  • Has not been modified, altered or repaired without BRUTEforce®’s approval.

BRUTEforce® will assess each warranty claim and may, subject to applicable law:

  • Repair the defective component.
  • Supply replacement parts.
  • Replace the affected product or component with the same or an equivalent product.
  • Use new, refurbished or equivalent replacement components where appropriate.
  • Provide another remedy where required by applicable law.

BRUTEforce® reserves the right to determine the appropriate warranty remedy, subject to any rights the customer has under applicable consumer protection legislation.

4. DEFINITION OF WEAR PARTS

Wear parts are components that naturally experience wear through normal use and may require periodic inspection, adjustment, servicing or replacement.

Depending on the product, wear parts may include:

  • Bushings
  • Bearings
  • Rollers
  • Grips
  • Handles
  • Knobs
  • Pins
  • Wheels
  • Catches and adjustment mechanisms
  • Rubber components
  • Other consumable or friction-related components

Specific warranty periods listed for cables, pulleys or upholstery take precedence over the general Wear Parts warranty.

Normal deterioration caused by ordinary use is not considered a manufacturing defect.

5. NORMAL WEAR & TEAR

This warranty does not cover normal wear and tear resulting from ordinary use.

Examples may include:

  • Gradual deterioration of upholstery.
  • Normal wear of grips.
  • Surface scratches caused by normal use.
  • Normal stretching or settling of cables.
  • Normal wear of bearings, bushings, rollers or other moving components.
  • Cosmetic deterioration that does not affect the safe operation or intended function of the product.

BRUTEforce® may require inspection or photographic/video evidence to determine whether an issue is caused by normal wear or a warrantable defect.

6. MAINTENANCE REQUIREMENTS

The customer is responsible for carrying out the maintenance specified in the product owner’s manual and BRUTEforce® maintenance instructions.

This may include:

  • Regular inspection of cables and attachment points.
  • Checking bolts, fasteners and adjustment mechanisms.
  • Cleaning equipment.
  • Lubricating components where recommended.
  • Inspecting pulleys, bearings and moving parts.
  • Replacing worn components when required.
  • Keeping equipment clean and dry.
  • Immediately stopping use if a component appears damaged or unsafe.

Failure to perform reasonable preventative maintenance may result in a warranty claim being declined where the lack of maintenance caused or contributed to the problem.

This does not limit any non-excludable consumer rights under applicable law.

7. NOISE, SQUEAKS & OPERATING SOUNDS

Fitness equipment contains multiple moving components and may develop operating noises over time.

Noise such as squeaking, clicking, clunking or similar sounds may result from:

  • Normal operation.
  • Normal component wear.
  • Loose fasteners.
  • Lack of lubrication.
  • Poor or insufficient preventative maintenance.
  • Environmental conditions.
  • Incorrect assembly or adjustment.

BRUTEforce® may require the customer to perform reasonable maintenance or adjustment procedures before determining that a noise constitutes a warranty defect.

Where a noise is caused by a manufacturing or component defect, it will be assessed under the applicable warranty.

8. WARRANTY EXCLUSIONS

This warranty does not cover damage or failure caused by:

  • Misuse.
  • Abuse.
  • Negligence.
  • Accident.
  • Improper or excessive use.
  • Incorrect assembly.
  • Incorrect installation.
  • Failure to follow the owner’s manual or instructions.
  • Failure to perform required maintenance.
  • Use outside published weight or operating limits.
  • Unauthorised modification or alteration.
  • Unauthorised repairs or replacement components.
  • Use of non-approved accessories or attachments where these cause the failure.
  • Commercial use of equipment not approved or rated for commercial use.
  • Use in an environment for which the product was not designed.
  • Exposure to rain, moisture or excessive humidity.
  • Outdoor use or storage.
  • Storage on a veranda, patio, balcony, shed, garage or other area where environmental conditions are unsuitable for the product.
  • Corrosion, rust or other environmental deterioration.
  • Damage caused while moving, relocating or transporting the product after delivery.
  • Damage caused by improper handling by the customer or a third party.
  • Cosmetic damage that does not affect the product’s operation or structural integrity.
  • Modifications to the product’s original design.
  • Failure to follow safety instructions.
  • Any use contrary to the intended purpose of the product.

9. OUTDOOR USE & STORAGE

Unless expressly designed and advertised for outdoor use, BRUTEforce® equipment is intended for use and storage in a suitable indoor environment.

The warranty is void for damage caused by outdoor exposure or unsuitable environmental conditions, including exposure to:

  • Rain
  • Water
  • Excessive humidity
  • Salt air
  • Condensation
  • Extreme temperatures
  • Direct weather exposure
  • Corrosive environments

This includes equipment stored or operated on patios, verandas, balconies, sheds or other areas that expose the equipment to unsuitable environmental conditions.

10. RESIDENTIAL & COMMERCIAL USE

Residential Warranty

The standard warranty applies to products used exclusively in a private residential environment by the occupants of that residence.

Examples include:

  • Private homes
  • Garages
  • Home gyms
  • Apartments
  • Townhouses

Commercial Use

Commercial use means use in a business, public or shared facility, including:

  • Commercial gyms
  • Personal training studios
  • Hotels
  • Apartment or residential complexes
  • Schools
  • Fire stations
  • Sports clubs
  • Corporate gyms
  • Other public or semi-public fitness facilities

Products intended or sold for commercial use will have the applicable commercial warranty stated at the time of purchase.

Use of a residential-rated product in a commercial environment may void the voluntary BRUTEforce® warranty.

This does not exclude or limit any consumer rights that cannot legally be excluded.

11. INSTALLATION & ASSEMBLY

The customer is responsible for ensuring that products are assembled and installed correctly unless professional assembly has been purchased from BRUTEforce® or an authorised installer.

Warranty coverage may be affected by incorrect assembly or installation where the incorrect assembly or installation causes or contributes to the failure.

Where BRUTEforce® or an authorised installer performs installation, any installation-related fault should be reported as soon as reasonably possible.

Where an installation service has been purchased, BRUTEforce® may require the customer to provide reasonable access to inspect and rectify an installation-related issue.

12. MODIFICATIONS & UNAUTHORISED REPAIRS

The warranty may be void for damage or failure caused by:

  • Drilling or cutting the frame.
  • Welding or structural modification.
  • Modification of cables or pulleys.
  • Modification of safety mechanisms.
  • Modification of electrical or electronic components.
  • Use of non-approved replacement parts.
  • Unauthorised repairs.
  • Alteration of the product’s original design.

BRUTEforce® approval should be obtained before undertaking any repair or modification that may affect a warranty claim.

13. FREIGHT & TRANSPORT DAMAGE

BRUTEforce® equipment is shipped in heavy-duty packaging and, depending on the product, may require specialised freight.

Customers should inspect deliveries upon arrival and photograph the packaging and product before the freight carrier leaves.

Visible freight damage should be recorded with the freight carrier where the carrier’s delivery process allows and reported to BRUTEforce® as soon as possible.

Damage that occurs during delivery is treated separately from a manufacturing defect and may be handled under BRUTEforce®’s Shipping Policy and the applicable freight carrier claim process.

Nothing in this section limits any rights or remedies that cannot legally be excluded.

14. WARRANTY CLAIM PROCESS

To make a warranty claim, contact:

BRUTEforce® Australia
Phone: (08) 9446 4816
Email: [email protected]

Please provide:

  • Name of purchaser.
  • Order number or invoice number.
  • Product name and model.
  • Serial number, where applicable.
  • Date of purchase.
  • Description of the fault.
  • Date the problem was first noticed.
  • Photographs of the affected component.
  • Video evidence where appropriate.
  • Any other information reasonably requested by BRUTEforce®.

BRUTEforce® may request additional photographs, video, diagnostic information or an inspection of the product before approving a warranty claim.

The customer should not return a product without first receiving return instructions from BRUTEforce®.

15. WARRANTY ASSESSMENT

BRUTEforce® reserves the right to inspect or assess the product before determining whether a fault is covered by this warranty.

Where appropriate, BRUTEforce® may:

  • Provide troubleshooting instructions.
  • Send replacement components.
  • Arrange inspection by a technician.
  • Require the product or affected component to be returned.
  • Repair the product.
  • Replace the affected component.
  • Replace the product with an equivalent model or component.

Where a claim is determined not to be covered by this warranty, the customer may be responsible for inspection, freight, labour, repair or other reasonable costs, where permitted by applicable law.

16. FREIGHT, LABOUR & SERVICE COSTS

Where a warranty claim is valid, BRUTEforce® will determine the appropriate costs it will cover in accordance with the applicable warranty and local law.

Costs associated with customer-requested services that are not covered by the warranty may include:

  • Freight.
  • Technician call-out fees.
  • Labour.
  • Inspection fees.
  • Replacement components.
  • Installation or reassembly.

On-site warranty service is not automatically included with every BRUTEforce® product.

Where an on-site service is available and requested, BRUTEforce® will advise the customer of any applicable call-out or service charge before the service is arranged.

17. REPLACEMENT PARTS

BRUTEforce® may provide new, refurbished or equivalent replacement components when fulfilling a warranty claim, where permitted by applicable law.

Replacement components will be functionally equivalent to the original component.

A replacement component does not automatically restart or extend the original warranty period unless required by applicable law or expressly confirmed by BRUTEforce®.

18. DISCONTINUED PRODUCTS

If the original product or component is no longer manufactured or available, BRUTEforce® may provide:

  • An equivalent replacement component;
  • A substantially similar replacement product; or
  • Another appropriate remedy,

subject to applicable law.

BRUTEforce® will endeavour to maintain appropriate replacement parts and repair facilities for a reasonable period after purchase where required by applicable law.

19. LIFETIME FRAME WARRANTY

Where a product carries a Lifetime Structural Frame Warranty, the warranty applies to defects in the structural integrity or workmanship of the original frame during the applicable lifetime period.

The Lifetime Structural Frame Warranty does not cover:

  • Cosmetic damage.
  • Surface scratches.
  • Paint deterioration.
  • Rust or corrosion caused by environmental exposure.
  • Damage caused by misuse or abuse.
  • Modifications or alterations.
  • Damage caused by incorrect assembly.
  • Damage caused by exceeding published load limits.

The Lifetime warranty is non-transferable and applies to the original purchaser, except where otherwise required by applicable law.

20. WARRANTY LIMITATIONS

To the maximum extent permitted by applicable law, BRUTEforce® is not responsible under this voluntary warranty for damage or loss arising solely from:

  • Misuse of the product.
  • Unauthorised modification.
  • Negligence.
  • Failure to maintain the product.
  • Use outside published specifications.
  • Use for a purpose for which the product was not designed.

Nothing in this warranty is intended to exclude, restrict or modify any rights or remedies that cannot legally be excluded, restricted or modified under applicable consumer protection law.

21. AUSTRALIAN CONSUMER LAW

For products sold in Australia:

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.

You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.

You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

These rights are in addition to the BRUTEforce® voluntary warranty and are not limited to the warranty periods stated above.

Australian Consumer Law guarantees can continue beyond the stated voluntary warranty period depending on the nature of the product and the circumstances of the failure. (ACCC)

22. UNITED STATES

For products sold in the United States, this warranty is intended to be a Limited Warranty and applies subject to applicable federal and state law.

Nothing in this warranty is intended to unlawfully exclude or limit rights or remedies that cannot legally be excluded or limited.

The terms of written warranties offered with consumer products in the United States may be subject to federal warranty requirements, including the Magnuson-Moss Warranty Act. (Federal Trade Commission)

23. EUROPE & OTHER COUNTRIES

For products sold in Europe or other jurisdictions, this warranty applies in addition to any mandatory consumer guarantees, statutory warranties or legal rights applicable in the country of purchase.

Where local law provides greater protection than this voluntary warranty, the applicable legal requirements will prevail.

Nothing in this warranty limits any mandatory right to repair, replacement, refund, withdrawal, compensation or other remedy available under applicable law.

24. GENERAL

BRUTEforce® reserves the right to update or modify this warranty policy for future purchases.

Any change to this warranty will not reduce rights already provided to a customer at the time of purchase, except where permitted by applicable law.

This warranty applies to the product and warranty period stated on the customer’s purchase documentation.

For warranty assistance, please contact:

Warranty Questions?

Reach Out Directly

Need a Warranty Claim?

Have your tax invoice ready and get in touch.

Contact Us